Redwood tree identification rests on a few fixed traits: bark, needles, cone size, and natural range. Coast redwood has soft furrowed bark and 0.5–1.25-inch cones; giant sequoia has spongy red-brown bark and 1.5–3-inch cones; dawn redwood is deciduous with feathery opposite needles. Range settles most doubts.

Redwoods confuse people because three unrelated-looking trees share one common name. Two are evergreen giants of California, and one is a deciduous Chinese transplant sold across the United States. Each species fixed its own anatomy for its own habitat, so the differences you see are not cosmetic.

This guide works at the level a forester uses: which tissue does what, why the traits diverge, and how to handle hybrids, planted individuals, and burned trunks. It also flags where texture-based guides quietly fail.

Anatomy behind the bark and needle differences

Start with bark, because bark is the trait most field guides oversimplify. Coast redwood bark is fibrous and soft, with deep vertical furrows, commonly 6–12 inches thick on mature trunks. The fibers are flexible and nearly fire-resistant. Giant sequoia bark runs 12–24 inches thick and crumbles in reddish, cinnamon-colored plates. Its spongy texture absorbs heat and insulates living tissue. Dawn redwood bark is thin, gray-brown, and peels in long strips when young, then turns fissured and shreddy with age.

Needles follow the same logic. Coast redwood foliage is dimorphic: flat, two-ranked sprays of needles 0.4–0.9 inch long on lateral shoots, and shorter awl-shaped needles pressed close to leading shoots. Giant sequoia needles are scale-like and awl-shaped, 0.1–0.25 inch long, overlapping densely along the twig on all sides. That dense packing conserves water and shades the stem. Dawn redwood needles are flat, soft, 0.4–0.8 inch long, arranged opposite in two rows, turning bronze before they drop in fall.

Twig arrangement decides quick calls. Coast redwood and giant sequoia needles spiral or alternate along stems; dawn redwood pairs them directly opposite each other. The plain-language version: look at a twig side-on, and paired needles mean dawn redwood.

Cones carry the same signal. Coast redwood cones measure 0.5–1.25 inches and mature in a single season. Giant sequoia cones run 1.5–3 inches and stay green on the tree for years, sometimes decades. Dawn redwood cones are 0.8–1 inch, nearly spherical, with about 14–20 shield-shaped scales, and they hang on long stalks.

Quantified context: size, range, and climate

Size tells you what you are looking at faster than any foliage key. Coast redwoods regularly reach 300–350 feet tall and 10–15 feet in diameter; the tallest known living individual exceeds 380 feet. Giant sequoias are shorter but bulkier: roughly 250–300 feet tall, with trunk diameters from 20 to 33 feet at breast height. Dawn redwood tops out near 100–130 feet in cultivation, with a trunk 3–5 feet across.

Native ranges are almost mutually exclusive, and this is the fastest filter. Coast redwood grows naturally along the California coast, roughly from the southwest corner of Oregon to Monterey County, in a fog belt from sea level to about 2,000 feet. Giant sequoia occurs naturally only on the western slope of the Sierra Nevada, in groves between roughly 4,500 and 8,000 feet elevation. Dawn redwood is native to a small region of south-central China but is planted in U.S. Department of Agriculture hardiness zones 4–8, especially along the East Coast and in the Midwest.

Distribution outside those zones means a planted tree nearly every time. A redwood in Ohio is a dawn redwood unless someone hauled a containerized seedling there. A giant-looking tree in coastal fog is coast redwood, because giant sequoia rarely thrives that low and near the ocean.

Fog explains the coastal anatomy. Coast redwood pulls a meaningful share of its water from fog intercepted by its canopy, and its soft fibrous bark holds moisture. That is one reason it survives summer drought without deep Sierra snowpack. Giant sequoia relies on Sierra snowmelt and deep granitic soils instead, and its massive bark is a fire adaptation, not a drought one.

Edge cases that break a clean key

Hybrids muddy the picture. The two California redwoods can cross when planted together, and nursery trade has produced notable crosses between dawn redwood and coast redwood. Hybrid foliage often looks intermediate: needle length between the parents, cone size between the parents, and twig arrangement that is neither cleanly opposite nor cleanly alternate. If a planted tree in a botanical garden shows mixed traits, assume hybrid before assuming a new species.

Planting history is the second trap. Dawn redwood was described from fossils before living trees were found in China in the 1940s, and it spread into American landscapes within a generation. Millions now grow in parks, cemeteries, and yards. Any redwood outside California and Oregon is usually planted stock, so identify by traits rather than by map.

Fire scars create the third problem. Coast redwood and giant sequoia both survive severe burns, and charred trunks can look alike for decades. Look at bark thickness in the scar's lip: sequoia's plate-like, spongy bark rebuilds in broad reddish slabs, while redwood's fibrous bark regrows in fine vertical strings.

The counterintuitive detail: dawn redwood is the only one of the three that drops its needles, yet it is also the only one sold widely as an ornamental for cold climates. Your "redwood" losing needles in November is not sick. It is behaving correctly, and that single observation confirms the species.

A professional caveat follows. Cultivars and juvenile trees can show atypical needles, and shade-grown lower branches on mature coast redwoods can look nothing like sun foliage. When in doubt, climb the trunk mentally: check bark first, then cone, then twig arrangement, in that order.

Misconceptions worth killing

The most common error is treating all three as one genus of conifer. Coast redwood is Sequoia sempervirens; giant sequoia is Sequoiadendron giganteum; dawn redwood is Metasequoia glyptostroboides. They sit in the same family, but they are distinct genera with different chromosomes and different tolerances. Coast redwood is hexaploid, with six sets of chromosomes; the other two are diploid. Dawn redwood is deciduous, which no evergreen coast redwood or giant sequoia is.

The second error is size. Big trunk does not mean giant sequoia. Coast redwoods are taller, and some coast redwood trunks exceed giant sequoia width in the best sites. Use cones and range, not girth, when the two are plausible.

The third error is assuming "redwood" means endangered. Coast redwood and giant sequoia are both conservation concerns, but dawn redwood's wild population is small and restricted even though cultivated trees are numerous. Your yard tree is not evidence of a healthy wild population.

A red-flag list keeps you from misidentifying confidently.

Needles paired directly opposite on the twig: dawn redwood, not a California species. Cones longer than 1.5 inches on a tree with gray-brown rough bark: giant sequoia, unless planted well outside its native grove range. A tree losing needles in autumn in a cold climate: dawn redwood; do not treat it as dead. Bark that crumbles in reddish plates: giant sequoia; fibrous stringy red bark points to coast redwood. Leading shoots with awl-shaped needles pressed tight against the stem: coast redwood or giant sequoia, not dawn redwood. A planted redwood far from coastal California: assume dawn redwood until cones say otherwise.

Comparison table: coast redwood, giant sequoia, dawn redwood

Trait Coast redwood Giant sequoia Dawn redwood
Scientific name Sequoia sempervirens Sequoiadendron giganteum Metasequoia glyptostroboides
Foliage Evergreen, dimorphic sprays Evergreen, scale-like awls Deciduous, opposite flat needles
Bark Fibrous, soft, 6–12 inches Spongy, reddish plates, 12–24 inches Thin, peeling strips, gray-brown
Cone length 0.5–1.25 inches 1.5–3 inches 0.8–1 inch
Native range Coastal California and southwest Oregon Sierra Nevada groves South-central China
Maximum height Over 350 feet 250–300 feet 100–130 feet in cultivation
Native elevation Sea level to about 2,000 feet About 4,500–8,000 feet Not applicable in U.S. landscapes

Seasonal timeline for field identification

Season Coast redwood Giant sequoia Dawn redwood
Winter Needles retained; new cones absent Needles retained; green cones persist on tree Bare branches with opposite leaf scars
Spring Reddish new growth on leading shoots Green cones swell; fresh awl needles Bright green opposite needles emerge
Summer Cones near maturity; fibrous bark obvious Cones green; plate bark warm in sun Full soft canopy; reddish leaf edges
Autumn New cones mature; no leaf drop Retained cones; needles retained Bronze needles drop; cones hang on stalks
Key cue month Cones: September–October Retention: year-round Leaf drop: October–November

The clearest month is November in most of the country, because a leafless dawn redwood is unmistakable next to anything evergreen. In coastal California, cones matured in late summer make the coast redwood call trivial.

Practical steps for positive identification

Walk up in order and stop when one trait settles the species. Keep a cone if you can, because cones do not change with season.

Check whether the tree is bare in late fall. If yes, dawn redwood. Check twig arrangement. Paired opposite needles mean dawn redwood even if the tree still holds needles. Measure cones against 1.5 inches. You can use a thumbnail: about one inch. Cones over 1.5 inches point to giant sequoia; 0.5–1.25 inches points to coast redwood. Inspect bark texture. Pull a flake: reddish crumbs mean giant sequoia; long stringy fibers mean coast redwood. Use elevation and location as a tiebreaker. A fog-belt tree below 2,000 feet is coast redwood; a Sierra grove tree near 6,000 feet is giant sequoia. Isolate planted trees. A redwood east of the Rockies is dawn redwood almost every time.

Thresholds reconcile, not conflict. The 1.5-inch cone cutoff sorts the two giants; the 2,000-foot elevation cutoff sorts coast redwood from planted trees; the deciduous trait sorts dawn redwood from everything evergreen. If two signals disagree, trust cones and twig arrangement over bark, because bark texture is the trait most influenced by age.

If you must photograph for expert confirmation, include a cone in hand, a twig side-on, a bark close-up, and a full tree silhouette. That four-frame set answers more than any single photo.

Limits of field identification

Traits vary with age and site, so no key is perfect. Young redwoods produce foliage that looks intermediate, and imprecise nursery stock can carry hybrid traits that defy any three-species frame. Tree identification literature also differs on cone size boundaries by a fraction of an inch, so treat 1.5 inches as a practical cutoff, not a law of nature.

This article draws on structural and range information, not on exact published population counts or current conservation numbers. Those figures change too often to anchor a stable guide. For a formal survey, use a regional flora and confirm with a qualified botanist or forester. The identification steps here are educational, not a substitute for a professional assessment of a specific tree.