The value of n in the equation 2.4 × 10^3 × 3 × 10^n = 7.2 × 10^9 is n = 6. This holds because the coefficient product 2.4 × 3 equals 7.2, which cancels the leading coefficient on the right side. The exponent sum 3 + n must then equal 9, giving n = 6. This reads as "solve for n in equation 2.4 × 103 × 3 × 10n 7.2 × 109" where the missing symbols are multiplication and equality.

Mechanism: Why Exponent Addition Works

Scientific notation splits every number into two parts. A coefficient between 1 and 10 carries the significant digits, and a power of ten carries the scale. When you multiply two numbers in this form, the coefficients multiply and the powers of ten add. That rule follows from the definition of exponents: 10^a × 10^b = 10^(a+b) for any real exponents a and b.

The equation written plainly is (2.4 × 10^3) × (3 × 10^n) = 7.2 × 10^9. Group the coefficients: 2.4 × 3 = 7.2. Group the powers: 10^3 × 10^n = 10^(3+n). The left side becomes 7.2 × 10^(3+n), which must equal 7.2 × 10^9.

Because 7.2 appears on both sides and is nonzero, divide both sides by 7.2. That leaves 10^(3+n) = 10^9. The base-ten exponential function is one-to-one, so equal powers imply equal exponents. Therefore 3 + n = 9, and n = 6. A plain-language version: the digits already match, so only the powers of ten need balancing.

Quantified Context: Magnitudes and Checked Values

The left-side product at n = 6 is 2.4 × 10^3 × 3 × 10^6. Compute 2.4 × 3 = 7.2, and 10^3 × 10^6 = 10^9. The product is 7.2 × 10^9, matching the right side exactly. In standard decimal form that is 7,200,000,000, or 7.2 billion.

Each factor has a decimal value worth tracking. The term 2.4 × 10^3 equals 2,400. The term 3 × 10^6 equals 3,000,000. Their product is 7,200,000,000. Order does not matter: 2,400 × 3,000,000 gives the same result as 3,000,000 × 2,400.

Exponent ranges matter for sanity checks. Powers of ten from 10^0 to 10^12 cover most everyday and scientific quantities. A product landing at 10^9 sits near the boundary of "billions," so a solution of n = 6 is plausible and not an outlier. If the computed n had landed below −20 or above 40, a transcription error would be the likely cause.

Edge Cases: Where the Simple Rule Needs Care

Three complications can break a naive exponent match. The first is coefficient overflow. If 2.4 × 3 had produced 24 instead of 7.2, the left coefficient would exceed 10 and require renormalization: 24 × 10^k = 2.4 × 10^(k+1). You would then compare exponents after that shift.

The second is nonzero-base restrictions. The step dividing by 7.2 is valid because 7.2 ≠ 0. Exponent rules for adding powers assume a nonzero base. With a zero coefficient, the two sides could both be zero for infinitely many n, and the equation would have no unique solution.

The third is the hidden base. The expression 10^n assumes base 10 throughout. If an exam intended base e or base 2, the exponent arithmetic changes completely. Always confirm the base before applying 10^a × 10^b = 10^(a+b).

A fourth edge case is notation ambiguity. The string "2.4 × 103" could mean 2.4 × 10^3 or plain 2.4 × 103. The presence of a later 10^n and a matched 7.2 coefficient confirms the scientific-notation reading. When notation is ambiguous, restate the equation in words before solving.

Common Misconceptions

Misconception one: multiplying the exponents. Some solvers compute 3 × n instead of 3 + n. That rule applies to a power raised to a power, as in (10^3)^n = 10^(3n), not to a product of two powers. Reading the structure carefully prevents this error.

Misconception two: treating coefficients as irrelevant. The coefficients are exactly why the answer is clean. Because 2.4 × 3 = 7.2, the leading digits match and vanish. Change 3 to 4, and the coefficients no longer cancel, forcing a log step.

Misconception three: assuming n must be an integer. Nothing requires integer exponents. If the coefficient product were 14.4, you would solve 10^n = (7.2 × 10^9)/(14.4 × 10^3) = 0.5 × 10^6, giving n ≈ 5.699. Many real problems yield fractional n.

Misconception four: forgetting to subtract. The equation 3 + n = 9 gives n = 6 by subtracting 3. A slip to n = 12 comes from adding instead of subtracting.

A counterintuitive professional caveat: in floating-point software, computing 10^9 directly can introduce rounding at the last digit. Engineers often compare logarithms instead: log10(left) = log10(right). That converts the multiplication into addition and sidesteps overflow when exponents are large.

Comparing Solution Methods

Method Steps Best for Risk
Coefficient and exponent match Cancel coefficients, equate exponents Clean ratios like 7.2 Misses overflow cases
Divide then take log Isolate 10^n, apply log10 Fractional or messy coefficients Rounding in logs
Decimal expansion Convert all to ordinary numbers Small exponents Overflow on large exponents
Symbolic algebra Divide both sides by known factors Teaching proof steps More writing
Calculator first Enter full product, reverse-solve Quick verification Hides structure errors
Logarithm comparison Compare log10 of both sides Very large exponents Log-base confusion

The table shows that no single method dominates. For textbook problems like this one, coefficient matching is fastest and least error-prone. For messy coefficients, the divide-then-log route is more robust. Mixing methods as a cross-check is the professional habit.

Timeline Table: Solving It in Order

Step Action Result
1 Restate equation with explicit symbols (2.4 × 10^3)(3 × 10^n) = 7.2 × 10^9
2 Multiply coefficients 2.4 × 3 = 7.2
3 Add exponents of ten 10^(3+n)
4 Write combined left side 7.2 × 10^(3+n)
5 Divide both sides by 7.2 10^(3+n) = 10^9
6 Equate exponents 3 + n = 9
7 Subtract 3 n = 6
8 Substitute back to verify 7.2 × 10^9 = 7.2 × 10^9

Reading top to bottom, each step depends only on the previous one. That linear structure makes the solution easy to audit. If any step fails verification, the error is isolated to that row.

Practical Actions and Verification Thresholds

Restate the equation in unambiguous symbols before touching numbers. Write multiplication signs and an equality sign explicitly. Multiply the coefficients first and check whether the product falls between 1 and 10. If it does not, renormalize before matching exponents. Add the exponents, set the sum equal to the right-side exponent, and solve. Here 3 + n = 9 gives n = 6. Verify by substitution. A correct n reproduces the right side exactly; a mismatch signals a sign or transcription error. Use a second method as a cross-check. Divide by the known coefficient and confirm the remaining power of ten. For engineering work, compare logarithms rather than raw powers. Log-based comparison handles exponents beyond 10^300 without overflow.

Red-flag warnings worth keeping visible:

Do not multiply exponents when the operation is multiplication; add them. Do not drop the coefficient; it often carries the cancellation. Do not assume integer answers; fractional n is legitimate. Do not skip the substitution check; errors hide in sign flips. Do not mix bases; confirm base 10 before applying the rule.

Thresholds worth memorizing for mental math: 10^3 is a thousand, 10^6 is a million, 10^9 is a billion, 10^12 is a trillion. Any solved exponent near these landmarks is easy to sanity-check against the decimal value. Here n = 6 means the second factor sits at a million, and its product with 2,400 lands at 7.2 billion.

Limitations and What This Solution Does Not Cover

This solution assumes exact real-number arithmetic. In finite-precision computing, the equality may hold only to within a tolerance, such as 10^(−12) relative error. That does not change the algebraic answer but does change how you test it.

The solution also assumes the intended equation is exactly as parsed. Real documents sometimes drop exponents or superscripts during copying, turning 10^3 into 103. If the original source is ambiguous, the safest action is to reconstruct the intended form from context rather than guess.

Finally, exponent laws do not extend cleanly to every operation. Addition of numbers in scientific notation requires aligning exponents first, not adding them. The rule used here is specific to multiplication. Applying it to a sum would produce wrong answers with no warning. For any high-stakes use of these rules in engineering or finance calculations, confirm results against an independent tool and the governing standard.