To solve for y in y - 1/2 = 3/2 x - 4, add 1/2 to both sides to get y = (3/2)x - 7/2, or in decimal form y = 1.5x - 3.5. The equation is already linear, so "solving for y" means isolating y to produce slope-intercept form, where the slope is 3/2 and the y-intercept is -7/2.
This look matters more than it seems. Students often read "solve for y" as "find a single number," but a two-variable equation has infinitely many solution pairs. What you are actually doing is rewriting the relationship so y sits alone on one side. That rewritten form exposes the slope and intercept directly, which is why algebra courses push it so hard.
Below, the mechanism, the arithmetic traps, and the graphical consequences get a full treatment.
What isolating y actually accomplishes
The equation y - 1/2 = (3/2)x - 4 contains three numbers and two variables. Isolating y is an exercise in inverse operations applied in reverse order of standard precedence. Subtraction is undone by addition, and the constant attached to y is 1, so no division step is needed.
Add 1/2 to both sides. The left side becomes y. The right side becomes (3/2)x - 4 + 1/2. Converting -4 to -8/2 lets you combine the constants over a common denominator: -8/2 + 1/2 = -7/2. The result is y = (3/2)x - 7/2.
The mechanism relies on the addition property of equality: adding the same quantity to both sides preserves the solution set. Nothing about the x term changes because 1/2 is a constant, not a coefficient of x. This is the single most common error source, addressed in the misconceptions section.
Plain restatement: you are balancing a scale, and the only weight you add is one-half to each pan.
The slope-intercept payoff, quantified
Once in y = mx + b form, the equation yields two numbers that fully determine the line. Here m = 3/2 = 1.5 and b = -7/2 = -3.5. Those two values let you sketch the entire graph without a table of values.
The slope of 1.5 means that for every 1 unit you move right, the line rises 1.5 units. Equivalently, moving 2 units right raises y by 3. The y-intercept of -3.5 means the line crosses the vertical axis at the point (0, -3.5). The x-intercept requires setting y = 0: 0 = 1.5x - 3.5, so x = 3.5/1.5 = 7/3 ≈ 2.33.
A useful check uses two points. At x = 0, y = -3.5. At x = 2, y = 3 - 3.5 = -0.5. The vertical change is 3 over a horizontal change of 2, confirming the slope. Any third point should sit on the same line; if it does not, an arithmetic slip occurred in the isolation step.
The slope tells you the line is increasing and relatively steep compared with a slope of 1. A slope of 1.5 rises faster than a 45-degree line, which corresponds to slope 1 in equal-axis scaling.
Edge cases and special inputs
Several inputs deserve separate handling. A slope of zero would produce a horizontal line like y = -3.5, but that is not this equation. An undefined slope belongs to vertical lines such as x = 4, which cannot be written in y = mx + b form at all, a boundary worth stating explicitly.
Negative x values work without special treatment. At x = -1, y = -1.5 - 3.5 = -5. Plugging negative inputs is where sign errors cluster, particularly when the slope itself is negative. Here the slope is positive, which reduces but does not eliminate that risk.
Fractional inputs are cleaner in fraction form. At x = 1/3, y = (3/2)(1/3) - 7/2 = 1/2 - 7/2 = -3. Working in decimals here, 0.333 times 1.5 gives 0.5 only approximately, and rounding can push the answer off by a small amount.
A less obvious edge case: equations where y appears with a coefficient other than 1. For 3y - 1/2 = (3/2)x - 4, you would divide every term by 3 after adding 1/2, yielding y = (1/2)x - 7/6. The mechanism is identical, but the division step is easy to forget.
Where students and tutorials go wrong
The most frequent mistake is distributing the added 1/2 into the x term. Adding 1/2 to (3/2)x - 4 does not change the coefficient of x; only the constant shifts. A tutorial that writes y = (3/2 + 1/2)x - 4 has silently multiplied instead of added.
The second error is mishandling the constant combination. Because -4 and +1/2 have opposite signs, they subtract in magnitude: 4 - 0.5 = 3.5, and the larger magnitude wins the sign, giving -3.5. Students who add magnitudes get -4.5, which is wrong.
A third trap is confusing "solve for y" with "solve the system." With one equation and two unknowns, no unique numeric solution exists. You need a second independent equation, or a specified x value, to pin down a point.
Adding 1/2 to the x coefficient instead of only to the constant Combining -4 and 1/2 as -4.5 by adding magnitudes Reporting a single number as the "answer" to a two-variable equation Dropping the negative sign when the constant sum crosses zero
A counterintuitive point professionals stress: the hardest part of this problem is not the algebra but reading the instruction. Textbook answer keys sometimes accept either y = (3/2)x - 7/2 or the decimal y = 1.5x - 3.5, and occasionally they demand standard form Ax + By = C. Knowing which form the grader expects matters as much as getting the arithmetic right. Multiply y = 1.5x - 3.5 by 2 to clear fractions and rearrange: 3x - 2y = 7, the standard form of the same line.
Forms of the same line, compared
The same relationship can wear several algebraic costumes. Each form has a different purpose, and converting between them is a routine skill.
| Form | Equation for this line | Best used for |
|---|---|---|
| Slope-intercept | y = (3/2)x - 7/2 | Graphing and reading slope and intercept |
| Standard | 3x - 2y = 7 | Solving systems by elimination |
| Point-slope | y + 0.5 = (3/2)(x - 2) | Writing the line from a point and slope |
| Decimal slope-intercept | y = 1.5x - 3.5 | Quick mental arithmetic |
| Solved-for-x | x = (2/3)y + 7/3 | Finding x-intercepts or inverse relations |
The standard form is reached by multiplying the slope-intercept form by 2 and rearranging. Point-slope uses the point (2, -0.5) derived earlier. Solving for x reverses the roles and produces a slope of 2/3, the reciprocal of 3/2, because the inverse of a linear function swaps the axes.
Each row represents the identical set of infinite points. Only the presentation changes.
How the solution unfolds step by step
The time course of this problem is short, but tracking each step prevents silent errors. The table below maps the sequence, the operation, and the intermediate result.
| Step | Operation | Resulting expression |
|---|---|---|
| 1 | Start with the given equation | y - 1/2 = (3/2)x - 4 |
| 2 | Add 1/2 to both sides | y = (3/2)x - 4 + 1/2 |
| 3 | Convert -4 to -8/2 | y = (3/2)x - 8/2 + 1/2 |
| 4 | Combine the constants | y = (3/2)x - 7/2 |
| 5 | Convert to decimals (optional) | y = 1.5x - 3.5 |
| 6 | Verify with x = 2 | y = 3 - 3.5 = -0.5 |
Step 6 is the verification pass, and it is the step most people skip. Substituting a convenient x value and confirming the arithmetic catches sign and coefficient errors before they propagate.
The whole procedure takes under a minute once practiced. Speed comes from doing the constant combination mentally as -4 + 0.5 = -3.5, but that shortcut is only safe after the common-denominator method is solid.
Practical actions for checking your work
Concrete habits make the difference between a correct answer and a plausible-looking one. These steps apply to any linear equation you isolate for y.
Substitute two different x values into both the original and the solved equation, and confirm both give matching y values. Re-add the constant you moved: take your answer and subtract 1/2 from the right side to see if you recover -4. Check that the sign of the intercept matches the direction the line crosses the y-axis on your sketch. Confirm the slope's sign by testing whether y increases or decreases as x increases. If a grader wants standard form, multiply through to clear fractions and rearrange rather than leaving a decimal. Keep fractions until the final step; decimals invite rounding drift on non-terminating inputs.
A quick mental threshold: if your slope and intercept do not let you plot two clean points without estimating, you probably have an arithmetic error or an unconverted fraction.
Limits and what this method cannot tell you
Isolating y solves the algebra of one linear equation. It does not determine a unique numerical value for either variable, because the solution set is an infinite line. That is a mathematical fact, not a gap in the method.
The technique also assumes the equation is linear in y. If y appeared squared, inside a fraction, or under a root, isolation would require different moves or produce multiple branches. For y² = 9, solving for y yields two values, +3 and -3, a case that trips up anyone trained on linear equations.
There is a representational limit too: vertical lines have no slope-intercept form. Any line where x is constant cannot be written as y = mx + b, which is why standard form exists as a fallback.
Finally, the decimal form y = 1.5x - 3.5 is exact here because both fractions terminate. That is a coincidence of these numbers, not a general rule. In equations with denominators like 3 or 7, decimals are approximations and fractions should be preserved for exactness.
The honest bottom line: this method is a reliable, fully mechanical procedure for rewriting a linear relationship, and it produces exact results when the arithmetic is done carefully. Its only real limitation is scope, not correctness.