Paper money is printed in the United States at two facilities: the Bureau of Engraving and Printing's main plant at 14th and C Streets SW in Washington, D.C., and its Western Currency Facility at 9000 Blue Mound Road in Fort Worth, Texas. The Bureau of Engraving and Printing, an agency of the Treasury Department, operates both plants. No private company prints U.S. paper currency. Coins are made elsewhere, by the U.S. Mint, which is a separate agency with its own facilities.

The printing mechanism, layer by layer

Currency production is not a single printing pass. It is a sequence of specialized steps, each performed on equipment built for that step alone. The Bureau of Engraving and Printing describes the process as intaglio printing followed by overprinting, cutting, and quality inspection.

Intaglio is the counterintuitive part. The ink sits in recessed grooves engraved into a steel plate, not on a raised surface like a rubber stamp. Presses apply several tons of pressure per square inch to pull the ink out of the grooves and onto the paper. The result is the raised texture you can feel on a new bill, especially across the portrait. That texture is a security feature, not an aesthetic choice. Counterfeiters with office printers cannot reproduce it.

The paper itself is distinctive. It is not wood pulp. It is a cotton-and-linen blend, roughly 75 percent cotton and 25 percent linen, made by a single supplier under contract. The material is durable enough to survive folding and washing, and it carries embedded security fibers that glow under ultraviolet light.

After the back and front are printed, the sheets move to overprinting, where the seals and serial numbers are added. Serial numbers must be unique, so this step requires precise registration. Sheets are then cut into individual notes, sorted, and inspected. The Bureau's own figures put the lifespan of a USD 1 note at roughly 6.6 years, while a USD 100 note lasts about 22 years, because larger notes circulate less and are handled more carefully.

Quantified context: scale of the operation

The Bureau of Engraving and Printing produces billions of notes annually, and the Fort Worth facility handles a substantial share of that volume. The Western Currency Facility opened in Fort Worth in 1991 and was expanded in the 2000s. It exists partly for redundancy: if one plant is disrupted, the other can continue production. That geographic separation is a deliberate resilience decision, not a cost decision.

Currency production is funded through a revolving fund rather than annual appropriations, and the Bureau sells notes to the Federal Reserve at the cost of production. The difference between production cost and face value is called seigniorage, and it flows to the Treasury. A USD 100 note costs a small fraction of its face value to produce, which is why higher denominations are disproportionately profitable for the government, even though they circulate less.

The Federal Reserve System, not the Bureau, decides how many notes of each denomination to order each year. The Bureau prints what the Fed orders. This distinction matters: the printing agency does not set monetary policy, and it does not decide how much money exists. It manufactures physical currency on demand.

Edge cases: what the two facilities do not do

The Fort Worth and D.C. plants do not make coins. Coins come from the U.S. Mint, which operates facilities in Philadelphia, Denver, San Francisco, and West Point. The Mint and the Bureau are separate agencies under the Treasury, and conflating them is one of the most common errors in casual explanations.

The plants also do not print digital dollars, and they do not manage bank reserves. Most money in the U.S. economy exists as deposits in commercial bank accounts, created when banks lend. Physical currency is a small slice of the money supply. If you are trying to understand where money comes from, the printing plants answer only a narrow part of the question.

Damaged currency is handled through a different channel. The Bureau's Office of Currency Standards in Washington evaluates mutilated notes and authorizes replacement under specific criteria, including whether more than 50 percent of the note is identifiable. That office is in the D.C. building, not the Fort Worth plant, so a torn bill sent for redemption does not travel through the printing line.

Common misconceptions, corrected

Several persistent myths deserve direct correction.

Myth: A single secret facility prints all U.S. cash. Reality: two Bureau plants, plus contracted paper supply and separate coin production. Myth: The Bureau decides how much money to print. Reality: the Federal Reserve places the orders. Myth: Currency paper is ordinary paper with security ink. Reality: it is a cotton-linen blend with embedded fibers. Myth: Coins and paper money come from the same place. Reality: the Mint makes coins; the Bureau makes notes. Myth: Printing plants also destroy old bills. Reality: the Federal Reserve handles note destruction after fitness sorting.

A professional caveat worth stating plainly: the Bureau publishes general descriptions of its security features, but it does not disclose every sensor, ink formulation, or plate specification. Public explanations of currency printing are necessarily incomplete at the technical margins. Anyone claiming a complete proprietary process description is overstating what is publicly documented.

The comparison below separates the two manufacturing streams that people routinely merge.

Attribute Bureau of Engraving and Printing (notes) U.S. Mint (coins)
Agency Treasury Department Treasury Department
Main facilities Washington, D.C.; Fort Worth, Texas Philadelphia; Denver; San Francisco; West Point
Product Paper currency Coins and bullion
Material Cotton-linen paper blend Metal alloys
Ordering authority Federal Reserve Federal Reserve
Output unit Individual notes, in straps and bundles Individual coins, in bags and rolls

Practical actions: verifying and handling currency

If your goal is to confirm a bill is genuine or to deal with damaged currency, the practical steps are concrete.

Check the security thread and watermark by holding the note up to light. On newer designs, the thread is embedded in the paper, not printed on the surface, and the watermark repeats the portrait. Feel the raised intaglio printing across the portrait and the collar. Tilt the note to see color-shifting ink on the numeral, a feature added in later redesigns.

For mutilated currency, the threshold that matters is the 50 percent rule. If clearly more than half the note is present and its genuineness is identifiable, the Bureau can generally replace it at full value. Between 50 and 40 percent, partial value may apply under specific conditions. Below that, replacement is usually denied. Send claims to the Bureau's Office of Currency Standards in Washington, not to a local bank.

Do not tape, laminate, or trim a damaged note before submitting it. Alterations can complicate authentication and slow the claim. Photograph the note first if the damage is disputed.

Limitations and what remains unsettled

Production figures change year to year with Federal Reserve orders, so any specific annual output number should be treated as a snapshot, not a constant. Facility roles can shift as equipment is upgraded or lines are consolidated, and the Bureau has periodically studied consolidating operations. Specific cost-per-note figures are published intermittently and vary by denomination, so a single number applied across all bills would be misleading.

What is stable is the structure: two Bureau plants, one cotton-linen paper supply chain, intaglio printing as the core security mechanism, and the Federal Reserve as the ordering authority. Those facts answer the keyword question reliably. The precise annual tonnage, the exact alloy recipes, and the current equipment inventory are details that change and are not fully public.

If you are handling currency in a commercial setting, consult your bank or a currency authentication specialist for disputes involving suspected counterfeits. This article is general educational information about manufacturing locations and processes, not a legal opinion or a guarantee of redemption outcomes for any specific note. For claims involving valuable or unusual currency, work with a qualified local professional or the Treasury agency directly.