You can get keys made near you at hardware stores, home-improvement centers, locksmith shops, and auto dealers, with most standard house-key copies ready in under 10 minutes for about USD 2 to USD 6. The fastest option is a self-service or staffed key-cutting machine at a big-box store; the most precise option is a professional locksmith, whose laser-cut or high-security duplications cost roughly USD 8 to USD 25. Where you go should depend less on distance than on the key's security class, because the wrong machine can turn a restricted key into a non-functional copy.
How key duplication transfers geometry from a master to a blank
A key is a mechanical code expressed in three dimensions. On a standard pin-tumbler house key, the bitting is a series of cuts along one edge, each cut at one of several depths. Spacing between cuts and cut depth together encode which pins the key will lift to the shear line. Duplication is the process of transferring that geometry to a blank of matching profile.
Mechanical duplicators do this by tracing. The original key is clamped in one vise, a blank in another, and a stylus follows the original's contour while a rotating cutter removes matching material from the blank. The cutting wheel typically spins at several thousand rpm, and the two vises move in parallel. This is why a worn original produces a worn copy: the stylus faithfully copies the original's defects, not the factory specification. A key that has lost 0.1 mm of material at each cut can produce a copy that binds or fails to turn.
Laser and CNC key machines work differently. They scan or measure the original, convert it to a digital profile, and cut the blank to a specification rather than by physical tracing. This removes cumulative trace error and allows the machine to apply calibrated compensation for a worn original. Higher-end locksmith equipment can cut both edge-bitted and dimple keys, and can handle side-milled high-security profiles that a mechanical tracer cannot follow.
The third mechanism is decoding. A locksmith measures cut depths with calipers or a key gauge, then cuts to the manufacturer's factory depths rather than to the original's current shape. This is the only method that reverses wear instead of reproducing it. It is also why a locksmith can often make a smoother copy of an old, tired key than any automated kiosk.
Plain language: a copy machine traces the key you have, while a locksmith can measure what the key was supposed to be.
What each key class costs and how long it takes in the US
Prices and turnaround below are typical US ranges as of recent market conditions and vary by region and store. Treat them as planning ranges, not quotes.
| Key class | Typical provider | Typical cost (USD) | Turnaround |
|---|---|---|---|
| Standard house key (Kwikset, Schlage, Weiser) | Hardware store, big-box, kiosk | 2 to 6 | 2 to 10 minutes |
| Standard key, after-hours | Locksmith | 15 to 40 | Same visit |
| Padlock and cabinet key | Hardware store, locksmith | 3 to 10 | Under 10 minutes |
| Car key, non-transponder (older vehicles) | Locksmith, some hardware stores | 10 to 40 | 10 to 30 minutes |
| Car key with transponder chip | Dealer, automotive locksmith | 60 to 250 plus programming | 30 minutes to same day |
| Smart key or proximity fob | Dealer, automotive locksmith | 150 to 500 plus programming | Same day to several days |
| High-security or restricted key (Medeco, Mul-T-Lock, ASSA) | Authorized locksmith only | 15 to 40 per copy | Same day to a week |
| Registered owner-card key | Authorized dealer or locksmith | 10 to 30 | Same day to a week |
Two patterns matter here. First, cost scales with the security class of the key, not the physical size of the metal. A USD 4 house key and a USD 200 smart key are both small pieces of brass or plastic, but the smart key carries an encrypted transponder and a dealer-programming step. Second, turnaround scales with authorization. Restricted keys often require proof that you are the registered owner, which adds a verification step that a standard copy does not.
The general rule: the more a key's profile is protected by patent or registration, the fewer places can legally copy it, and the more you will pay for the same physical operation.
Edge cases that break the standard copy-shop assumption
Not every key behaves like a house key, and several common situations produce copies that look correct but fail at the lock.
Worn originals are the most frequent failure. A mechanical tracer reproduces the wear, so the new key inherits the old key's reduced cut depths. If the lock has also worn, the tolerances may have shifted in the same direction and the copy works; if only the key wore, the copy may not. The fix is decoding, not tracing.
High-security and restricted keys are the second major edge case. These profiles often carry a patent and a restriction agreement that limits duplication to authorized locksmiths, and some systems ship with an owner card that a copy shop is contractually required to see. A hardware store that copies them without authorization may produce a blank that physically fits but lacks the correct side-milling or security pin geometry, so the lock will not turn.
Transponder and smart vehicle keys are the third. The metal cut is only half the key; the electronic half must be programmed to the vehicle's immobilizer. Some automotive locksmiths can program via the OBD port on site, while others require dealer equipment. A cut-only key will start nothing on a vehicle with an immobilizer.
The counterintuitive detail: a perfectly cut duplicate can still fail because the lock cylinder is worn. Locks wear at the pins and springs, and a lock that has drifted may accept only the original key's slightly relaxed tolerances. In that case, replacing the cylinder is cheaper than chasing a copy that fits.
Red flags to watch for: A copy shop that does not compare the original and copy side by side before handing it back. A blank that visually matches the profile but has a different groove pattern or side-milling. A restricted-key copy offered without any owner-card or authorization check. A vehicle key quoted at a price far below market that omits programming. A kiosk that copies a worn original without offering a decode option. Any provider that cannot explain what class of key you are holding.
Misconceptions about copying keys and who can do it
The first misconception is that any machine can copy any key. Most self-service machines handle only a narrow range of standard edge-bitted profiles. Dimple keys, side-milled high-security keys, and most transponder keys are outside their scope. A machine's presence in a store does not mean it can cut your key.
The second is that a copy is only as good as the machine. The stylus-versus-decode distinction above means the operator's choice of method matters more than the machine's price. A careful tracery on a mid-range duplicator can beat a careless copy on premium equipment.
The third is that "locksmith" is a protected title everywhere. Licensing and bonding requirements for locksmiths vary by state, and some jurisdictions require registration while others do not. Before using an unfamiliar shop, ask whether the technician is licensed or bonded in your state, and whether the shop keeps records of restricted-key copies. Consumer protection agencies have documented locksmith scams that quote low prices by phone and escalate on arrival.
The fourth is that a key copy is a permanent backup. Copies drift over time as the new key wears and as the lock wears. Keeping two independent copies and rotating them limits the chance that both match a single lock's current tolerance.
Practical steps before you leave the counter
Use this short threshold list to decide where to go and what to verify.
Identify the key class first. Standard brass house key, padlock key, transponder vehicle key, or restricted/side-milled key. This single classification determines your provider. For standard house keys, a staffed hardware store or big-box key center is sufficient, and you should expect a working copy for under USD 6 in under 10 minutes. For a worn original that already sticks, ask for a decode or measure-and-cut service rather than a trace copy, and expect to pay toward the upper end of the locksmith range. For any vehicle key with a chip or fob, confirm in advance that the provider can program, not just cut, and ask whether programming is included in the quote. For restricted or high-security keys, bring the owner card and confirm the shop is authorized for that brand before they cut. Test the copy in the lock before you leave. It should turn smoothly without jiggling or force. If it does not, ask for a re-cut rather than accepting it.
Threshold to remember: if a copy fails twice at the same lock, stop buying copies and have the cylinder inspected. Repeated copy failures usually indicate a worn lock, not a string of bad blanks.
Limits of what a copy can fix and when to escalate
A key copy solves one problem: you need another key that opens the same lock. It does not solve a worn lock, a lost-key security concern, or a broken lock mechanism. If a key is lost and the lock protects anything sensitive, the correct response is rekeying or cylinder replacement, not duplication. Rekeying changes the pins so old keys stop working, and it typically costs less than a full lock replacement.
Reconciliation of the price ranges above: the low hardware-store range assumes a standard key class and a working, unworn original. The higher locksmith and dealer ranges assume either a wear-correction decode, a restricted profile, or an electronic programming step. These are not competing quotes for the same job; they are different key classes. Compare like with like before deciding.
For vehicle keys, confirm whether the immobilizer requires dealer-level programming. Some models accept locksmith programming, and some do not. A provider who quotes only a cut price for a transponder key has not quoted the full job. Ask specifically whether programming is included and whether the key will start the vehicle before you pay.
For restricted-key systems, the component that cannot be copied is the authorization, not the metal. If you have lost the owner card, contact the system's manufacturer or your building manager rather than shopping for a cut. Unauthorized copies of restricted profiles may also void a building's master-key warranty, which is a cost far larger than the key itself.
Finally, treat any quote that is dramatically below the market ranges in the table as a signal to ask what is excluded. The most common exclusions are programming, authorization verification, and re-cut if the first copy fails.
This article is general educational information about key duplication methods and provider types, not a security assessment or a recommendation for any specific business. It does not promise that any copy will function in your lock or vehicle. For locks protecting a home, business, or vehicle, consult a licensed local locksmith or the vehicle dealer for your specific system.