Fluorine (F) has the smaller atomic radius, and bromine (Br) has the larger atomic radius; in the specific choice offered, the answer is b. Br. The reason is structural, not numerical: Br sits in period 4 with electrons in the n = 4 shell, while F sits in period 2 with electrons in the n = 2 shell. Adding a filled shell moves the outer electrons farther from the nucleus. Any reputable source should give you Br without hesitation—and if it doesn't, the source is likely confusing atomic radius with ionic radius or electronegativity.

That answer is easy. The useful part is understanding why, where the exceptions hide, and what the numbers actually mean when you look them up. Atomic radius is not a single, fixed property of an atom. It is a derived quantity that depends on how it was measured, what state the atom is in, and whether you are talking about a bonded atom, a free atom, or an ion. Fluorine versus bromine is a clean case—same group, different periods—but the clean case is a good place to expose the machinery that trips students up on harder comparisons.

The nuclear charge and shielding mechanism

Atomic radius trends are driven by two competing effects: the pull of the nucleus on the outer electrons and the shielding of that pull by inner electrons.

When you move down a group, the principal quantum number n increases. Fluorine's outermost electrons occupy the n = 2 shell. Bromine's outermost electrons occupy the n = 4 shell. The n = 3 shell in bromine is full, and the n = 2 shell is full, so bromine has two complete inner shells between the nucleus and its outer electrons that fluorine does not have. Each additional shell adds roughly one electron–shell's worth of distance to the radius, because the shells are successive probability clouds rather than sharp orbits.

Shielding quantifies why the extra nuclear charge does not cancel the effect. Bromine has 35 protons versus fluorine's 9, a difference of 26 protons. If those 26 extra protons acted undiminished on the outer electrons, the radius would collapse. They do not, because the inner electrons screen the nuclear charge. The effective nuclear charge felt by an outer electron, often written Z_eff, rises slowly down a group but never enough to overcome the addition of a whole new shell. The result is a net expansion.

There is a second, subtler effect: electron–electron repulsion. As the number of electrons increases, the outer electrons repel each other, which also pushes the electron cloud outward. In bromine, 35 electrons repel each other; in fluorine, 9. The repulsion scales with electron count and reinforces the shell effect.

A plain-language version: bromine's outer electrons live in a bigger, higher-numbered shell, and the extra positive charge from bromine's larger nucleus is mostly hidden behind the inner electrons. The hiding wins.

Quantified context: what the numbers look like

The measured radii depend on the definition. Covalent radius is derived from the bond length in a molecule; van der Waals radius from the distance at which non-bonded atoms pack; metallic radius from the atomic spacing in a metal crystal; ionic radius from the spacing in an ionic solid. Each carries its own systematic offset.

For fluorine and bromine, the ordering is unambiguous across definitions. In widely used compilations of covalent radii, fluorine is reported near 57 picometers (pm) and bromine near 120 pm, roughly a factor of two. Van der Waals radii follow the same direction: fluorine near 147 pm and bromine near 185 pm. The absolute values are definition-dependent and you should not treat them as exact constants, but the gap—roughly 60 to 70 pm—is large and robust.

Quantity Fluorine (F) Bromine (Br) Notes
Period 2 4 Br adds two full shells
Group 17 17 Same valence configuration
Protons 9 35 +26 nuclear charge
Electrons 9 35 +26 electrons
Outer shell n = 2 n = 4 Primary driver of radius
Typical covalent radius ~57 pm ~120 pm Compilation-dependent
Typical van der Waals radius ~147 pm ~185 pm Definition-dependent
Pauling electronegativity 3.98 2.96 Falls down the group

The table makes the professional caveat visible: the numbers shift with definition, but the ranking does not. If you need a defensible answer for an exam or a report, cite the covalent-radius ordering and note that the physical trend, not the decimal value, is the point.

Electronegativity belongs in the same paragraph because it is the inverse shadow of radius. Fluorine is the most electronegative element (Pauling value 3.98), and bromine is less so (about 2.96). Electronegativity falls down a group partly because the outer electrons are farther from the nucleus and more shielded—the same mechanism that makes the radius larger. Students who memorize "electronegativity decreases down a group" often do not connect it to radius; they are two expressions of one underlying electron-distance story.

A timeline of how the measurement itself works

Atomic radius is not measured in one shot. The conceptual timeline below shows where the numbers come from and why different tables disagree.

Stage What happens Why it matters to the value
Molecule or crystal prepared Atoms are placed in a defined chemical environment Radius is inferred, not directly observed
Interatomic distance measured X-ray diffraction or spectroscopy gives a bond length or packing distance The measurement is a distance between nuclei, not a radius
Distance split between atoms The distance is divided between the two atoms by convention Splitting rules differ across methods
Definition selected Covalent, van der Waals, metallic, or ionic radius Each applies a different split and adds a systematic offset
Value tabulated and averaged Multiple compounds are combined Tables may average different datasets
Value reported in a database A single number is published Different databases can differ by tens of percent

The takeaway is structural: an atomic radius is a model-dependent quantity built from a measured internuclear distance. That is why a careful answer says "fluorine's covalent radius is smaller than bromine's" rather than "the radius of fluorine is exactly 57 pm."

Edge cases where the simple trend bends

The fluorine-versus-bromine comparison is clean because both are neutral atoms in the same group. The trend gets messier in four situations.

First, ions. A fluoride ion (F⁻) gains an electron and expands, because the extra electron increases repulsion without adding a proton. A bromide ion (Br⁻) also expands relative to neutral Br, but the expansion does not reverse the group order: bromide remains larger than fluoride. Do not confuse ionic radius with atomic radius when the question asks about neutral atoms.

Second, the d-block and f-block contractions. Across period 4 there is a slow contraction because added protons are poorly shielded by d electrons. Down a group, the f-block lanthanide contraction makes the elements below period 5 unusually compact, so some period-5 and period-6 comparisons are closer than you would predict from the shell argument alone. This affects rows below bromine, not the F-versus-Br pair.

Third, the diagonal and noble-gas anomalies. Noble gases are often reported with van der Waals radii rather than covalent radii, and they appear anomalously large in some tables because the measurement definition changes. Comparisons across definitions can produce apparent contradictions—one table showing helium larger than hydrogen, another showing the opposite.

Fourth, the phase and bonding environment. An atom in a metal crystal, a diatomic gas, and a molecular solid can be assigned different radii. Bromine is a liquid at room temperature; fluorine is a gas. The bulk state changes the measurement environment, not the underlying shell structure.

The counterintuitive detail worth holding onto: the periodic trend is reliable, but the tabulated radius is not a property of an isolated atom the way mass is. If you ever see a table where fluorine looks larger than a period-3 element, check the measurement definition before concluding the trend has failed.

Misconceptions that produce the wrong answer

Misconception 1: "Bigger nucleus means smaller atom." This confuses nuclear charge with net pull. Extra protons do pull harder, but extra inner shells shield that pull. Down a group, shielding wins; across a period, it does not. Fluorine and bromine are in the same group, so the shielding argument applies and Br is larger.

Misconception 2: "Fluorine is the most electronegative, so it must be the biggest." The reverse is closer to true in this context: high electronegativity goes with a small, tightly held electron cloud.

Misconception 3: "Atomic radius increases across a period." It decreases across a period because nuclear charge grows while electrons are added to the same shell. The increase happens down a group. Students who mix the two axes flip the F-versus-Br answer.

Misconception 4: "Ionic radius and atomic radius are the same thing." They are not. A fluoride ion is larger than a fluorine atom, and a bromide ion is larger than a bromine atom, but the group ordering is preserved.

Misconception 5: "The radius is a fixed number." It is a derived value. Different definitions give different numbers; the ordering is the durable fact.

Red flags when reading secondary sources: A table that mixes covalent and van der Waals radii in one column without labeling the definition. A claim that electronegativity and atomic radius trend in the same direction down a group. An answer that compares F to Br on the basis of valence-electron count alone. A source that gives a single radius value with no measurement method. A comparison that silently switches between neutral atoms and ions.

Practical actions for getting the right answer under pressure

If you are answering this on an exam, in a lab report, or in a study group, use a repeatable procedure rather than recall.

Locate both elements by period and group. F is period 2, group 17; Br is period 4, group 17. Same group, different period means the shell argument decides. Check whether the question specifies neutral atoms or ions. Neutral atoms give Br larger. Ions preserve the ordering here but change the absolute values. Check whether the source table labels its definition. If it does not, treat the numbers with caution and rely on the ordering. State the mechanism in one sentence: bromine's outer electrons occupy a higher-numbered shell, and the extra nuclear charge is shielded by inner electrons. Reconcile any conflicting thresholds you encounter. A table listing F at 42 pm and Br at 114 pm, and another listing F at 57 pm and Br at 120 pm, is not a contradiction—it is two definitions. If you are setting a cutoff for a problem set, state which definition you are using and apply it consistently. For a written answer, give the ranking, the mechanism, and the caveat about definition-dependence. That combination is what separates a full-credit answer from a guessed one.

If you are using the number in a computational model, note that many modeling packages default to a specific radii set (for example, a covalent-radius table or a van der Waals set). Verify the set before you feed the values into a distance cutoff, a packing calculation, or a visualization. A 60 pm difference between F and Br is large enough to change a molecular-mechanics result, so sourcing matters.

What the answer does and does not establish

The answer b. Br is correct for neutral atoms under standard periodic-trend reasoning, and it is stable across covalent and van der Waals definitions. The mechanism is well understood: higher principal quantum number, additional inner shells, and partial shielding of the extra nuclear charge.

What the answer does not give you is an exact distance. Atomic radius is a derived, definition-dependent quantity, and tables differ by tens of percent in absolute terms. If you need a numerical radius, supply the definition and the source. If you need the ranking—which is what the question asks—the ranking is robust.

A final caution for students and self-learners: the periodic trends are taught as reliable rules because they work for the majority of comparisons, but the professional reality is that every trend has exceptions rooted in shielding irregularities, relativistic effects, and measurement definitions. F versus Br is a case where the trend is trustworthy and the mechanism is transparent. Learn it as a model, not as a memorized fact, and you will get the harder comparisons right too.

No medical, legal, or financial disclaimer is needed here: this is ordinary chemistry, not a high-stakes personal decision.